Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Kawasaki ER-6F

Model: Kawasaki Er 6f
Part: Headlight bulb

Video tutorial

These short and simple instructions will show us how to disassemble and replace the low beam bulb of the front headlight of the Kawasaki ER-6F motorcycle. First of all, we put the motorcycle on the central stand and start to remove the plastic bulb protection cap; then we disconnect the electrical connector of the bulb to remove it, as shown in the video.

At this point, we install the new low beam bulb, of the right type and with the same attachment; we insert it in the correct direction and make the connection, finally verifying the correct operation!


Posted on 6 November 2025 by ScegliAuto


Related tutorials

How do you replace the front brake pads on the Kawasaki ER 6F?
How do you replace the front brake pads on the Kawasaki ER 6F?
Er 6f To replace the front brake pads of the Kawasaki ER 6F, you will need to loosen the screws that secure the caliper to its mounting, so that it can be …
Replacing the Front Brake Pads on a Kawasaki ER-6F
Replacing the Front Brake Pads on a Kawasaki ER-6F
Er 6f This guide provides instructions on how to remove and replace the front brake pads on a Kawasaki ER-6F motorcycle. First, place your motorcycle on a …
How to Change the Engine Oil in a Kawasaki ER-6F?
How to Change the Engine Oil in a Kawasaki ER-6F?
Er 6f This tutorial shows how to change the engine oil in a Kawasaki ER-6F, a very simple and quick operation to perform every 12 months. First, ensure the…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos