Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Rear Brake Pads on Kawasaki ZX 6R

Model: Kawasaki Zx 6r
Part: Brake pads

Video tutorial

Let's see how to replace the rear brake pads on a Kawasaki ZX 6R. Position the bike on the rear or front stand. Undo the locking pin of the brake caliper and remove it from the wheel support.

Use a screwdriver to remove the pads (to be replaced) from the rear brake caliper. Clean the brake caliper thoroughly with a brush.

Fit the new pads onto the caliper; refit the brake caliper with the support onto the brake disc. Tighten all pins and test the braking.

Prepare to perform the same operations on the other calipers present on the bike.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Kawasaki ZX 6R
How to Replace the Front Brake Pads on a Kawasaki ZX 6R
Zx 6r To replace the front brake pads on a Kawasaki ZX 6R, loosen the bolts securing the caliper to the back of the corresponding disc. Once the bolts are …
How to Replace the Front Brake Pads on a Kawasaki ZX 6R
Zx 6r To replace the front brake pads on a Kawasaki ZX 6R, loosen the screws securing the brake caliper to the corresponding disc so that the caliper can b…
Replacing Front Brake Pads on Kawasaki ZX-6R
Replacing Front Brake Pads on Kawasaki ZX-6R
Zx 6r In this video tutorial, you will learn how to remove and replace the front brake pads on a Kawasaki ZX-6R. First, remove the brake caliper by unscrew…

How to Replace the Front Headlamp of the Harley Davidson Street Glide

Today, we will provide step-by-step instructions to remove and replace the front headlamp of the Harley Davidson Street Glide. First, place the motorcycle on a stand and begin by removing the metal side frame by undoing the fixing screw; then remove the front optical unit by disconnecting the bulb's electrical connector, as shown in the video. At this point, install the new optical unit, checking its operation and making adjustments if necessary; finally, reattach the metal side frame.

Watch the video!


by ScegliAuto

More videos