Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the ECU on Kawasaki ZX-14R

Model: Kawasaki Zx 14r
Part: Control unit

Video tutorial

In this video tutorial, you will learn how to remove the Engine Control Unit (ECU) on the Kawasaki ZX-14R motorcycle, from 2012 to 2020. First, remove the seat of your motorcycle and open the small tool compartment; you will immediately find the mounting bracket for the ECU: unscrew the fastening screws to remove the metal bracket.

Next, disconnect the electrical connectors of the ECU to remove it, as illustrated in the video; once removed, you can access the headlight control unit located right next to it. Reconnect the cables to reassemble everything!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Battery Replacement on Kawasaki ZX 14R
Battery Replacement on Kawasaki ZX 14R
Zx 14r Replacing the battery on a Kawasaki ZX 14R is very simple, and now you will see how. To access it, remove the small left side fairing as indicated in…
How to Replace the Exhaust on a Kawasaki ZX 14R
How to Replace the Exhaust on a Kawasaki ZX 14R
Zx 14r To replace the exhaust on the Kawasaki ZX 14R, loosen the bolts that secure the exhaust to its housing, allowing it to be freed from the correspondin…
How do you replace the motor oil in the Kawasaki ZX-14R?
How do you replace the motor oil in the Kawasaki ZX-14R?
Zx 14r The oil change of the Kawasaki ZX-14R can be done by loosening the drain plug located in the central lower part of the motorcycle: once the plug is r…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos