Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. : Versys 250

Replacing Indicator Bulbs on the Kawasaki Versys 250

Model: Kawasaki Versys 250
Part: Light bulb

Video tutorial

In this video, you will see the instructions for removing and replacing the rear indicator bulbs (this also applies to the front ones) on the Kawasaki Versys 250, following these simple steps. First, remove the seat of your motorcycle and start by unscrewing the plastic cover and bracket located under the passenger seat, loosening the fixing screws; then unscrew the screws of the indicators to remove them, as shown in the video.

Now insert and fit the new rear indicators, following the video until the end!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Side Panels of the Kawasaki Versys 650?
How to Remove the Side Panels of the Kawasaki Versys 650?
Versys To remove the side panels of the Kawasaki Versys fairing, loosen the bolts located at the top of the panel, just below the grips. These are 4 mm scre…
How to replace the front headlight bulbs in the Kawasaki Versys 650?
How to replace the front headlight bulbs in the Kawasaki Versys 650?
Versys 650 In this tutorial we can see how to replace the front headlight bulbs in the Kawasaki Versys 650, an extremely simple and quick operation. First of al…
How is the service reset of the Kawasaki Versys 1000 performed?
How is the service reset of the Kawasaki Versys 1000 performed?
Versys 1000 The service indicator programming is used to not forget the moment when it is necessary to service, change oil and engine filter of our motorcycle, i…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos