Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Ninja 300
Part:

Start by unscrewing the screws that secure the two side fairings located under the seat and gently pull them out, taking care not to damage their clips. Now you can unscrew the bolts beneath these fairings, which are now accessible, and then remove the seat. Also, remove the rear seat and unscrew the screws that secure the two fairings surrounding it. Following the procedure in the video, it's time for the side fairings: as you can see, there are not only bolts to unscrew but also clips to remove by levering with a flat screwdriver. Follow the steps in the video until complete disassembly.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat of a Kawasaki Ninja 300
How to Remove the Rear Seat of a Kawasaki Ninja 300
Ninja 300 Before you can begin, position your Kawasaki Ninja 300 upright. Start by inserting the motorcycle key into the designated lock located at the bottom …
How to Replace the Battery in the Kawasaki Ninja 300?
How to Replace the Battery in the Kawasaki Ninja 300?
Ninja 300 Replacing the battery in the Kawasaki Ninja 300 is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, ensure …
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
How to Replace the Headlamp Bulb on a Kawasaki Ninja 300
Ninja 300 To replace the headlamp bulb on the Kawasaki Ninja 300, rotate the handlebars in the opposite direction of the bulb to be replaced. This will allow y…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos