Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Vulcan 650 S
Part:

To replace the rearview mirror on the Kawasaki Vulcan 650 S, loosen the nut located at the base of the mirror support: once this nut is loosened, you can unscrew the mirror by turning it counterclockwise and removing it from its housing. When it has been completely removed from its housing, position the new replacement part by turning it clockwise and securing it in place: you can secure it by tightening the nut located at the base of the mirror.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Kawasaki Vulcan 650 S?
How to Change the Engine Oil on the Kawasaki Vulcan 650 S?
Vulcan 650 S To change the engine oil on the Kawasaki Vulcan 650 S, loosen the drain plug located at the bottom centre of the bike: by unscrewing it, the used oil…
How to Replace the Front Headlight on the Kawasaki Vulcan 650 S?
How to Replace the Front Headlight on the Kawasaki Vulcan 650 S?
Vulcan 650 S This tutorial shows how to replace the front headlight on the Kawasaki Vulcan 650 S, a very simple and quick operation. First, ensure that the key is…
Removing the Front Headlight on Kawasaki Vulcan 650 S
Removing the Front Headlight on Kawasaki Vulcan 650 S
Vulcan 650 S In today's video, learn how to remove and replace the original headlight with an LED type on the Kawasaki Vulcan 650 S, following the instructions be…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos