Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Plastics (Fairings) on Keeway SilverBlade 250i

Model: Keeway Silverblade 250i
Part:

Video tutorial

In today's tutorial video, learn how to remove the front fairings of a Keeway SilverBlade 250i. First, unscrew the screws around the fairing to detach the front part; then remove the hidden screws at the back and perform the same operation with all the other plastic parts at the front, as illustrated in the video.

Remember to disconnect any electrical connectors or cables that may be hidden inside the fairings, held by clips.

Then, follow the video until the end for complete disassembly!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Keeway Silverblade 250
How to Replace the Air Filter on a Keeway Silverblade 250
Silverblade 250i To replace the air filter on a Keeway Silverblade 250, open the under-seat compartment by lifting the padding and loosening all the screws securing t…
How to Change the Engine Oil of the Keeway Silverblade 250?
How to Change the Engine Oil of the Keeway Silverblade 250?
Silverblade 250i To change the engine oil of the Keeway Silverblade 250, you need to unscrew the oil drain plug located at the central lower part of the bike: once th…
Spark Plug Replacement on Keeway Silverblade 250 EFI
Spark Plug Replacement on Keeway Silverblade 250 EFI
Silverblade 250i In this video, you will see how to remove and replace the spark plug of a Keeway Silverblade 250 EFI engine. First, remove the plastic from the right…

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos