Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s see how to perform routine maintenance by changing the engine oil and oil filter on a Keeway K-Light 202. First, position the bike on the centre stand and begin to unscrew the drain bolt located under the engine using a ratchet spanner; then let it drain into a container for about ten minutes. Next, remove the oil filter, which is located next to the drain bolt; use a 16 mm socket spanner to unscrew it and replace it with the correct new one: then add the new oil!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Keeway K-Light 202
How to Change the Engine Oil in the Keeway K-Light 202
K Light 202 .. changing the engine oil in the Keeway K-Light 202 is an extremely simple and quick task. Before proceeding, ensure the engine is sufficiently.. …
How to Replace the Air Filter on a Keeway K Light 202?
How to Replace the Air Filter on a Keeway K Light 202?
K Light 202 .. To replace the air filter on the Keeway K Light 202, first remove the screws securing the seat and slide it out of its housing. Using an Allen.. …
How to replace the air filter on the Keeway K-Light 202?
How to replace the air filter on the Keeway K-Light 202?
K Light 202 .. To replace the air filter on the Keeway K-Light 202, loosen the side panel located on the right side of the bike, just below the fuel tank. Once.. …

How to Replace the Headlight Bulb on the Keeway RKS 125?

In this tutorial, we will see how to replace the headlight bulb on the Keeway RKS 125, a very simple and quick operation. First, ensure that the instrument panel is off to operate safely, then unscrew the two bolts of the handlebar using an Allen key. Next, unscrew the bolts located at the front of the instrument panel with a socket wrench, move the headlight unit forward and disconnect the power connector. At this point, simply remove the rubber cap, unclip the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos