Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in this tutorial, changing the engine oil in the Keeway K-Light 202 is an extremely simple and quick task. Before proceeding, ensure the engine is sufficiently cool for safe operation. Start by positioning a container underneath the bike, then locate the drain bolt, loosen it with a 17mm spanner, and allow all the oil in the system to drain out. Next, tighten the bolt, remove the top cap, and add the necessary amount of oil to reach the ideal level.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Keeway K-Light 202
How to Change the Engine Oil and Oil Filter on a Keeway K-Light 202
K Light 202 ..he engine oil and oil filter on a Keeway K-Light 202. First, position the bike on the centre stand and begin to unscrew the drain bolt located under t.. …
How do you replace the muffler of the Keeway K-Light 202?
How do you replace the muffler of the Keeway K-Light 202?
K Light 202 .. To replace the exhaust of the Keeway K-Light 202, you need to loosen the screws that attach it to its housing: this will be located near the.. …
How to replace the tires of the Keeway K-Light 202
How to replace the tires of the Keeway K-Light 202
K Light 202 .. and replace the tires of the Keeway K-Light 202 motorcycle, in simple and quick steps. First of all, we put the motorcycle on the stand and.. …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos