Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Keeway K Light 202

Model: Keeway K Light 202
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Keeway K Light 202, loosen the screws that secure it to the corresponding supports and also unscrew the screw on the ring that connects the exhaust to the exhaust manifold. Once the exhaust terminal is freed from its housing, you can position the new one, securing it with the appropriate support screws and inserting the ring.

After the installation is complete and the exhaust is secured correctly, check that everything is functioning properly.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How do you replace the muffler of the Keeway K-Light 202?
How do you replace the muffler of the Keeway K-Light 202?
K Light 202 To replace the exhaust of the Keeway K-Light 202, you need to loosen the screws that attach it to its housing: this will be located near the rear whe…
How to Adjust the Valves on the Keeway K Light 202
How to Adjust the Valves on the Keeway K Light 202
K Light 202 To adjust the valves on the Keeway K-Light 202, you need to loosen the screws that secure the valve cover, located on the right side of the bike, jus…
How to Change the Engine Oil and Oil Filter on a Keeway K-Light 202
How to Change the Engine Oil and Oil Filter on a Keeway K-Light 202
K Light 202 Let’s see how to perform routine maintenance by changing the engine oil and oil filter on a Keeway K-Light 202. First, position the bike on the centr…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos