Replacing the Chain on a Keeway Superlight 125

Model: Keeway Superlight
Part:

This video is currently unavailable

Unscrew the central bolt located on the right disc of the rear wheel. Once done, also unscrew the two rear bolts (one on each side).

Use a suitable pliers or a small flat screwdriver to open and disengage the chain links, as shown in the video. Take the new chain you purchased and install it by rotating the rear wheel and threading it through the positions where the original chain ran. Once done, secure it and screw in the initially exposed bolts.

The video shows additional work to adapt the chain to the bike, but if you buy an equivalent part to the original, you won't have this issue.

Updated on 20 April 2026 by ScegliAuto

Related tutorials

How to refuel a Keeway Superlight 125

Superlight Before you can start, take your Keeway Superlight 125 to a petrol station. Begin by inserting the motorcycle key into the lock on the fuel tank cap, …

How to Replace the Headlamp Bulb on a Keeway Superlight

Superlight To replace the headlamp bulb on a Keeway Superlight, you need to loosen the screws located at the bottom of the headlight assembly. Once these screws…

How to Replace the Air Filter of the Keeway Superlight?

Superlight To replace the air filter of the Keeway Superlight, loosen the screws securing the triangular cover located just under the seat on the right side of …

How to Set the Clock on the Benelli TRK 502X?

To adjust the clock on the Benelli TRK 502X, press and hold the button located at the bottom left of the instrument cluster: this will cause the hours to start flashing. By repeatedly pressing the adjacent button, you will be able to modify the hours; then press and hold the left button again to make the minutes start flashing. These can be changed in the same way as the hours, confirming by pressing the left button.

Watch the video!

by ScegliAuto

Replacing the Chain on a Keeway Superlight 125

Related tutorials

How to Set the Clock on the Benelli TRK 502X?

More videos