Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway K Light 202
Part: Engine

In order to disassemble the engine of the Benelli K-Light 202, first you need to remove it from its housing by unscrewing all the bolts that secure it to its supports and disconnecting connectors and hoses. Once the engine block is freed, you can loosen the screws that secure the cylinder, removing it from its seat and identifying the internal piston: the latter can be detached from its connecting rod by removing the retaining ring and pulling out the pin. This way you can access the other internal components, replacing them with new spare parts.

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the muffler of the Keeway K-Light 202?
How do you replace the muffler of the Keeway K-Light 202?
K Light 202 .. To replace the exhaust of the Keeway K-Light 202, you need to loosen the screws that attach it to its housing: this will be located near the.. …
How to Change the Engine Oil in the Keeway K-Light 202
How to Change the Engine Oil in the Keeway K-Light 202
K Light 202 .. changing the engine oil in the Keeway K-Light 202 is an extremely simple and quick task. Before proceeding, ensure the engine is sufficiently.. …
How to replace the air filter on the Keeway K-Light 202?
How to replace the air filter on the Keeway K-Light 202?
K Light 202 .. To replace the air filter on the Keeway K-Light 202, loosen the side panel located on the right side of the bike, just below the fuel tank. Once.. …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos