Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sedona
    4. : Key

Kia Sedona - Key

Kia Sedona (2006-2014 / VQ)
How to replace the key battery in the KIA Sedona
Replacing the battery in your KIA Sedona Mk1 key is one of the simplest do-it-yourself maintenance operations you can carry out. Below you will find all the …read all…
Posted on 6 June 2023 by ScegliAuto
Kia Sedona (2015-2021 / YP)
How to replace the key battery in the Kia Sedona
In the following guide we will show you the various steps necessary to be able to correctly change the battery in the key of your Kia Sedona Mk2. First, get …read all…
Posted on 1 June 2023 by ScegliAuto
Kia Sedona (2015-2021 / YP)
How to replace the remote control battery in KIA Sedona?
As we can see in this tutorial, changing the remote control battery on your KIA Sedona is a very simple and fast operation. To do this, we will not need any …read all…
Posted on 29 November 2022 by ScegliAuto
Kia Sedona (2015-2021 / YP)
How to replace the remote control battery in KIA Sedona?
In this tutorial we can see how to change the battery of the KIA Sedona remote control, an extremely simple and fast operation. To do this, we will need a …read all…
Posted on 18 November 2022 by ScegliAuto
Shock absorbers (1) Car stereo (1) Battery (2) Bushings (1) Key (4) Checks and maintenance (3) Headlight (1) Air filter (1) Headlight bulb (1) Engine oil (1) Door panel (1) Wheel (1) Fuse box (1) Windscreen wipers (1) Thermostat (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos