Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote battery of the KIA Sedona?

Model: Kia Sedona YP - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery of the KIA Sedona. For this simple and quick operation, you will need a replacement CR2032 battery and a small flathead screwdriver.

First, extract the emergency key by pressing the button on the back, then separate the two halves of the remote by prying with the screwdriver in the indicated slot. Once done, remove the old battery and insert the replacement, making sure to position it with the negative pole facing you. Finally, reassemble everything by following the reverse procedure.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery for the KIA Sedona?
How to Replace the Remote Battery for the KIA Sedona?
Kia Sedona (2015-2021 / YP) In this tutorial, you will see how to replace the remote battery for the KIA Sedona, a very simple and quick operation. To do this, you will need a s…
How to Replace the KIA Sedona Remote Battery
How to Replace the KIA Sedona Remote Battery
Kia Sedona (2015-2021 / YP) As we can see in this tutorial, replacing the remote battery for the KIA Sedona is a very simple and quick operation. To do this, you will not need a…
How to Replace the Key Battery in a KIA Sedona
How to Replace the Key Battery in a KIA Sedona
Kia Sedona (2006-2014 / VQ) Replacing the key battery in your KIA Sedona Mk1 is one of the simplest DIY maintenance tasks you can perform. Below are all the necessary steps. Fir…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos