Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a Kia Venga

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: License plate light

Video tutorial

This video shows how to replace the damaged bulb of the number plate light on a Kia Venga (to replace the number plate light, you need to remove the internal trim of the tailgate). To begin: open the rear tailgate of the car, then unscrew the screws on the plastic trim of the tailgate using a screwdriver.

Detach the plastic trim from the tailgate, remove the retaining clips of the number plate light with a screwdriver (if not present, just remove the bulb). Finally, remove the bulb from the number plate light and replace it with a new one. Refit all the parts in reverse order.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…
How to Replace the Battery of the Kia Venga?
How to Replace the Battery of the Kia Venga?
Kia Venga (2010-2019 / MK 1) To replace the battery of the Kia Venga, open the bonnet to access the components inside the engine bay: just below the windscreen, you will locate t…
How to Replace the Battery on a Kia Venga
How to Replace the Battery on a Kia Venga
Kia Venga (2010-2019 / MK 1) Open the bonnet of your Kia Venga. Move the battery cover aside. Next, unscrew and remove the screws securing the two terminals to the battery, then …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos