Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the tire pressure sensor of the Kia Rio?

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part:

To reset the tire pressure warning light on the Kia Rio, you need to inflate the tires until they reach the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires are inflated to the correct pressure, you can go inside the car and turn on the ignition: the warning light should turn off automatically after a few moments. If the light remains on, it may be necessary to drive for a few kilometers to help the sensors work and turn off the warning light.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Kia RIO
How to reset the tire pressure warning light on the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) Today we will see the procedure to reset the tire pressure warning light of the Kia RIO; before performing the reset of the TPMS sensors, it is neces…
How do you reset the tire pressure light of the Kia Rio?
How do you reset the tire pressure light of the Kia Rio?
Kia Rio (2016-2023 / YB, MK 4, SC) The tire pressure sensor shown on the instrument panel of the Kia Rio can be reset by inflating the tires until they reach the recommended pressure v…
Tire pressure reset on a Kia Rio
Tire pressure reset on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) In this very short tutorial today we can see how to reset the tire pressure warning light on a Kia Rio, third series model produced from 2011 to 2017…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos