Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Kia Rio 4

Model: Kia Rio MK 4, SC, YB - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

The manual reset of the tire pressure warning light on your Kia Rio Mk4 is a really simple operation to carry out, and thanks to the procedure described in this new guide of ours, you will have no difficulty in completing it. First, you need to go inside the vehicle and then start the instrument panel normally and then locate the button panel located to the left of the steering wheel.

Immediately after, press and hold the button with the tire icon on it and wait for the confirmation of the reset of the warning light on the instrument panel display.

Finally, release the button and you are done.


Posted on 8 April 2025 by ScegliAuto


Related tutorials

Tire pressure reset on a Kia Rio
Tire pressure reset on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) In this very short tutorial today we can see how to reset the tire pressure warning light on a Kia Rio, third series model produced from 2011 to 2017…
How to Reset the Tyre Pressure Warning Light on a Kia Rio?
How to Reset the Tyre Pressure Warning Light on a Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommend…
How to Reset the Tyre Warning Light on a Kia Rio
How to Reset the Tyre Warning Light on a Kia Rio
Kia Rio (2016-2023 / MK 4, SC, YB) To reset the tyre pressure and turn off the tyre warning light on a Kia Rio, switch on the ignition without starting the engine. In the video, the li…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos