Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the 2015 Kia Cee'd

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Front bumper

Today we will explain how to remove the front bumper of the 2015 Kia Cee D by yourself. To remove the bumper, we need to use a Phillips screwdriver and a Torx key size 20. Unscrew the screws on the fender to unlock the side of the bumper. Remove the plastic clips on the bottom of the bumper. Unscrew the lower bumper screws with the key. Remove the bumper by disconnecting the connector. After removing the bumper, we can perform the necessary maintenance operations; the assembly follows the reverse procedure.

Posted on 24 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper on a Kia Cee'd
Removing the Front Bumper on a Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) Remove the front bumper from the Kia Cee'd to replace it with a new one of the same size. Lift the car with a jack, then unscrew the securing screws …
How to Remove the Front Bumper from the Kia Cee'd?
How to Remove the Front Bumper from the Kia Cee'd?
Kia Cee D (2006-2012 / MK 1) To remove the front bumper from the Kia Cee'd, open the bonnet to access all the screws securing the bumper from the top; once these screws are loose…
Removing the Front Headlamp of a Kia Cee'd
Removing the Front Headlamp of a Kia Cee'd
Kia Cee D (2006-2012 / MK 1) Are the bulbs damaged on your Kia Cee'd? Here’s how to remove the front headlamp. Lift the front bonnet by pulling the lever located at the bottom ri…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos