Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on a Kia Cee'd

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Front bumper

Remove the front bumper from the Kia Cee'd to replace it with a new one of the same size. Lift the car with a jack, then unscrew the securing screws located at the top of the bumper to start disassembly. Once the screws at the top are removed, unscrew the screws in the wheel arch liners (remove the pins at the bottom of the bumper). Remove the bumper by hand from the front of the car (disconnect any electrical terminals of the fog lights). Fit the new bumper and screw in all the securing screws. Test the operation of the front fog lights.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the 2015 Kia Cee'd
How to remove the front bumper of the 2015 Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) Today we will explain how to remove the front bumper of the 2015 Kia Cee D by yourself. To remove the bumper, we need to use a Phillips screwdriver a…
How to Remove the Front Bumper from the Kia Cee'd?
How to Remove the Front Bumper from the Kia Cee'd?
Kia Cee D (2006-2012 / MK 1) To remove the front bumper from the Kia Cee'd, open the bonnet to access all the screws securing the bumper from the top; once these screws are loose…
Removing the Front Headlamp of a Kia Cee'd
Removing the Front Headlamp of a Kia Cee'd
Kia Cee D (2006-2012 / MK 1) Are the bulbs damaged on your Kia Cee'd? Here’s how to remove the front headlamp. Lift the front bonnet by pulling the lever located at the bottom ri…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos