Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlamp of a Kia Cee'd

Model: Kia Cee D MK 1 - Years 2006-2012
Part: Headlight

Are the bulbs damaged on your Kia Cee'd? Here’s how to remove the front headlamp. Lift the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop. Unscrew the securing screws located above the front headlamp. Once the screws are removed, take the headlamp out from above the bumper. Disconnect the headlamp cover caps. Replace the damaged bulbs, and fit the new bulbs into the front headlamp. Cover the headlamp with the previously removed cap. Refit the headlamp above the bumper and screw in the screws. Finally, test the lights.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp of the Kia Cee'd
How to Replace the Front Headlamp of the Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) The procedure for removing and replacing the front headlamp and its bulbs on the Kia Cee'd is very simple and takes only a few minutes. First, open t…
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
Kia Cee D (2012-2018 / JD, MK 2) To replace the front headlamp bulb on a Kia Cee'd, open the bonnet to access the components at the rear of the headlamp: here you will find the circu…
How to Replace the Key Battery of the Kia Cee'd?
How to Replace the Key Battery of the Kia Cee'd?
Kia Cee D (2018-2024 / MK 3, CD) After a brief clarification that this video guide applies to multiple Kia vehicle models, including the Kia Cee'd, we will now describe the procedure…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos