Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Kia Cee'd

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Headlight bulb

When it comes to Kia vehicles, replacing the headlight bulb, whether left or right, almost always follows the same procedure. Even on the Kia Cee D produced from 2012 to 2018, to replace the right headlight bulb, we need to open the hood by pulling the lever near the driver's seat. Remove the cap of the light fixture and disconnect the connector on the bulb so that we can insert a new one and close the cap. Finally, turn on the parking lights to check that everything is working properly. This same procedure can be used for replacing the bulb on the opposite headlight.

Posted on 14 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Kia Cee'd?
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
Kia Cee D (2012-2018 / JD, MK 2) To replace the front headlamp bulb on a Kia Cee'd, open the bonnet to access the components at the rear of the headlamp: here you will find the circu…
How to Change the Headlight Bulbs on a Kia Cee D?
How to Change the Headlight Bulbs on a Kia Cee D?
Kia Cee D (2012-2018 / JD, MK 2) The dipped beam bulb of the front headlight on the Kia Cee D has the following specifications: H7 fitting, 12V and 55W. Once you have purchased the n…
How to Replace the Front Headlamp of the Kia Cee'd
How to Replace the Front Headlamp of the Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) The procedure for removing and replacing the front headlamp and its bulbs on the Kia Cee'd is very simple and takes only a few minutes. First, open t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos