Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Kia Cee'd

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Today, follow these steps to replace the right rear light bulb on a Kia Cee'd: - turn off the car and park on level ground; - open the boot; - unscrew the two outer screws; - remove the left rear light; - disconnect the connector; - remove the light from its housing; - take out the bulb and insert the new bulb into the light; - reconnect the connector; - insert the light and secure it with the two screws.

The same steps apply to replace the left rear light bulb.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

Replacing the rear light bulb on the Kia Cee'd
Replacing the rear light bulb on the Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) If one of the bulbs in the rear light of the Kia Cee'd fails, replace it as soon as possible for your safety and to avoid penalties. To do this, open…
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
Kia Cee D (2012-2018 / JD, MK 2) To replace the front headlamp bulb on a Kia Cee'd, open the bonnet to access the components at the rear of the headlamp: here you will find the circu…
How to Replace the Front Headlamp Bulb in a Kia Cee'd
How to Replace the Front Headlamp Bulb in a Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) When it comes to Kia vehicles, replacing the front headlamp bulb, whether left or right, almost always follows the same procedure. For Kia Cee'd mode…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos