Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the rear light bulb on the Kia Cee'd

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Tail light

If one of the bulbs in the rear light of the Kia Cee'd fails, replace it as soon as possible for your safety and to avoid penalties. To do this, open the boot and unscrew the two screws in the drip tray next to the light containing the bulb to be replaced. At this point, grip the light and pull it firmly towards you: you need to apply some force to overcome the resistance of two pressure pins. Once the light is removed, you will have access to the bulb holder, which can be opened by rotating it; pull out the burnt bulb and replace it with a new one.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Kia Cee D
How to replace the rear headlight bulb of the Kia Cee D
Kia Cee D (2012-2018 / JD, MK 2) Today we will show you the steps to replace the bulb of the right rear headlight of the Kia Cee D. The steps to follow are: - turn off the car and pa…
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
Kia Cee D (2012-2018 / JD, MK 2) To replace the front headlamp bulb on a Kia Cee'd, open the bonnet to access the components at the rear of the headlamp: here you will find the circu…
How to Change the Headlight Bulbs on a Kia Cee D?
How to Change the Headlight Bulbs on a Kia Cee D?
Kia Cee D (2012-2018 / JD, MK 2) The dipped beam bulb of the front headlight on the Kia Cee D has the following specifications: H7 fitting, 12V and 55W. Once you have purchased the n…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos