Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulb on the 2013 Kia Cee'd

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: Light bulb

Replacing the position light bulb on the 2013 Kia Cee'd is straightforward, and this brief video tutorial will guide you through the process. To gain access to the underside of the car, lift it with a jack. Next, remove the retaining bolt from the plastic cover to access the position light bulb. You may need some time and effort, but you will eventually manage to remove it. Now take the new P21 5W 12V bulbs and connect them to the connector. To insert the new bulb, perform the same twisting motions used to remove it. Close the cover and test the bulb's operation.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Kia Cee'd?
How to Replace the Front Headlamp Bulb on a Kia Cee'd?
Kia Cee D (2012-2018 / JD, MK 2) To replace the front headlamp bulb on a Kia Cee'd, open the bonnet to access the components at the rear of the headlamp: here you will find the circu…
Replacing the rear light bulb on the Kia Cee'd
Replacing the rear light bulb on the Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) If one of the bulbs in the rear light of the Kia Cee'd fails, replace it as soon as possible for your safety and to avoid penalties. To do this, open…
How to replace the rear headlight bulb of the Kia Cee D
How to replace the rear headlight bulb of the Kia Cee D
Kia Cee D (2012-2018 / JD, MK 2) Today we will show you the steps to replace the bulb of the right rear headlight of the Kia Cee D. The steps to follow are: - turn off the car and pa…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos