Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulbs on a Kia Cee D?

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

The dipped beam bulb of the front headlight on the Kia Cee D has the following specifications: H7 fitting, 12V and 55W. Once you have purchased the new bulb with the correct specifications, proceed with the replacement. Lift the bonnet, secure it, and unscrew the headlight cap by turning it anti-clockwise.

Repeat the same operation to remove the bulb holder, disconnect the burnt-out bulb, and insert the new one. Then, refit the bulb holder and the cap by turning them clockwise this time. Finally, close the bonnet.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp of the Kia Cee'd
How to Replace the Front Headlamp of the Kia Cee'd
Kia Cee D (2012-2018 / JD, MK 2) The procedure for removing and replacing the front headlamp and its bulbs on the Kia Cee'd is very simple and takes only a few minutes. First, open t…
How to Remove the Front Headlight Bulbs on Kia Cee'd
How to Remove the Front Headlight Bulbs on Kia Cee'd
Kia Cee D (2006-2012 / MK 1) Replace the front headlight bulbs on a Kia Cee'd if they are blown or if you want to change type. Open the front bonnet by pulling the lever located …
Removing the Front Headlamp of a Kia Cee'd
Removing the Front Headlamp of a Kia Cee'd
Kia Cee D (2006-2012 / MK 1) Are the bulbs damaged on your Kia Cee'd? Here’s how to remove the front headlamp. Lift the front bonnet by pulling the lever located at the bottom ri…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos