Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of the Kia Ceed 2008

Model: Kia Cee D MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

If you want to replace the front headlamp bulb of your first series Kia Ceed (2008), just read the following procedure and implement the steps described. First, purchase a new bulb that is perfectly compatible with your car. Then, fully lift the front bonnet and secure it with the safety hook.

At this point, remove the rubber cap located behind the headlamp that requires the bulb replacement and disconnect the electrical connector present. Finally, remove the faulty bulb and replace it with the new one.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of the Kia Ceed
How to Remove the Front Headlight of the Kia Ceed
Kia Cee D (2006-2012 / MK 1) Today's guide will show you the main steps on how to remove and replace the front headlight of the Kia Ceed, following the instructions below. First,…
Replacement of the main headlight of the Kia Ceed
Replacement of the main headlight of the Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) In this video we see how to change the front headlight bulb of the Kia Ceed; we are talking about the low beam headlight. On this model it is very ea…
How to Replace the Number Plate Light Bulb in a Kia Ceed
How to Replace the Number Plate Light Bulb in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) How do you replace the number plate light bulb in a Kia Ceed? This video shows how to replace the damaged bulb. Open the boot lid, and remove the int…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos