Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulb in a Kia Ceed

Model: Kia Cee D MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: License plate light

See other generations:
Video tutorial

How do you replace the number plate light bulb in a Kia Ceed? This video shows how to replace the damaged bulb. Open the boot lid, and remove the internal plastic cover.

Use a screwdriver to remove the screws securing the light unit located in the tailgate above the car's number plate. Once the transparent light unit is removed, extract the bulb using your fingers.

Install the new bulb in the holder (same size and voltage), and reassemble the light unit onto the tailgate. Finally, test the correct operation of the previously installed bulb.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb on the Kia Ceed
How to Replace the Number Plate Bulb on the Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) Follow the steps below to remove and replace the number plate bulb on the Kia Ceed. First, move to the rear and open the boot; then remove the rear t…
How to Replace the Rear Light Bulb on a Kia Ceed
How to Replace the Rear Light Bulb on a Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) Let’s see how to replace the rear light bulb on a Kia Ceed. In the rear boot, there are small compartments that provide access to the rear lights. Op…
How to Replace the Number Plate Light on a 2015 Kia Ceed
How to Replace the Number Plate Light on a 2015 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) In this guide for all owners of a second series Kia Ceed (2015), discover step by step how to correctly and safely replace the number plate light. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos