Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on the Kia Ceed

Model: Kia Cee D JD, MK 2 - Years 2012-2018
Part: License plate light

Follow the steps below to remove and replace the number plate bulb on the Kia Ceed. First, move to the rear and open the boot; then remove the rear tailgate panel to access the number plate light cover, as shown in the video. At this point, disconnect the electrical connector and remove the two bulbs, replacing them with new ones (with the same fitting); reconnect and finally refit the cover!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light Bulb in a Kia Ceed
How to Replace the Number Plate Light Bulb in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) How do you replace the number plate light bulb in a Kia Ceed? This video shows how to replace the damaged bulb. Open the boot lid, and remove the int…
How to Replace the Number Plate Light on a 2015 Kia Ceed
How to Replace the Number Plate Light on a 2015 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) In this guide for all owners of a second series Kia Ceed (2015), discover step by step how to correctly and safely replace the number plate light. Fi…
How to replace the front headlight bulb of the 2008 Kia Ceed
How to replace the front headlight bulb of the 2008 Kia Ceed
Kia Cee D (2006-2012 / MK 1) If you want to replace the front headlight bulb of your first generation Kia Ceed (2008), just follow the procedure below and follow the steps descri…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos