Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a 2015 Kia Ceed

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

In this guide for all owners of a second series Kia Ceed (2015), discover step by step how to correctly and safely replace the number plate light. First, completely switch off the vehicle and ensure it is parked safely on a flat surface.

Next, go to the rear of your Kia Ceed and lift the boot. At this point, remove the number plate light using a flat screwdriver and disconnect the electrical cable.

Finally, connect the new light to the cable and refit it correctly.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb on the Kia Ceed
How to Replace the Number Plate Bulb on the Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) Follow the steps below to remove and replace the number plate bulb on the Kia Ceed. First, move to the rear and open the boot; then remove the rear t…
How to Replace the Number Plate Light Bulb in a Kia Ceed
How to Replace the Number Plate Light Bulb in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) How do you replace the number plate light bulb in a Kia Ceed? This video shows how to replace the damaged bulb. Open the boot lid, and remove the int…
How to reset the service light on the 2017 Kia Ceed
How to reset the service light on the 2017 Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) To correctly complete the manual reset of the service light on your second generation Kia Ceed (year 2017), you must carefully read the following pro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos