Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Kia Ceed

Model: Kia Cee D JD, MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Let’s see how to replace the rear light bulb on a Kia Ceed. In the rear boot, there are small compartments that provide access to the rear lights. Open this compartment using the tip of a flat screwdriver, and with a small spanner, unscrew the bolt that holds the bulb you want to change - check from the other side - carefully remove it and replace it, remembering never to touch the bulb with bare hands, as this can significantly shorten the bulb's lifespan.

Now, insert the new bulb, place the light unit back in its housing, re-screw the closure bolt, and replace the plastic cover. Job done.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of the Kia Ceed 2008
How to Replace the Front Headlamp Bulb of the Kia Ceed 2008
Kia Cee D (2006-2012 / MK 1) If you want to replace the front headlamp bulb of your first series Kia Ceed (2008), just read the following procedure and implement the steps descri…
How to Replace the Number Plate Light Bulb in a Kia Ceed
How to Replace the Number Plate Light Bulb in a Kia Ceed
Kia Cee D (2006-2012 / MK 1) How do you replace the number plate light bulb in a Kia Ceed? This video shows how to replace the damaged bulb. Open the boot lid, and remove the int…
How to Replace the Number Plate Bulb on the Kia Ceed
How to Replace the Number Plate Bulb on the Kia Ceed
Kia Cee D (2012-2018 / JD, MK 2) Follow the steps below to remove and replace the number plate bulb on the Kia Ceed. First, move to the rear and open the boot; then remove the rear t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos