Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Cee D
    4. : How to disassemble the front headlight of the Kia Ceed.

Kia Cee D - Video tutorial

Model: Kia Cee D MK 1 - Years 2006-2012
Part: Headlight
Operation: How to disassemble the front headlight of the Kia Ceed.

Today's guide will show us the main steps on how to remove and replace the front headlight of the Kia Ceed, following the instructions below. First, we open the hood of our car and start unscrewing the fixing screws we find on the top and sides of the headlight assembly; then we disconnect the electrical connector of the bulbs, in order to detach and remove the front light permanently, as shown in the video. At this point, if necessary, we replace the bulbs or the entire headlight assembly, applying the reverse procedure!


Posted on 28 April 2023 by ScegliAuto



How to replace license plate light on Kia Ceed 2015
Kia Cee D (2012-2018 / JD, MK 2) In the following guide dedicated to all of you owners of a Kia Ceed second series (year 2015) we will find out step by step how to replace the licens
How to reset the service light on the Kia Ceed.
Kia Cee D (2012-2018 / JD, MK 2) In this new guide dedicated to your Kia Ceed (2012-2018), we will show you a very simple and quick method through which you can manually reset the se
How to remove the Kia Ceed airbag cushion.
Kia Cee D (2006-2012 / MK 1) In today's video, we will see how to disassemble the central cushion, containing the airbag, in the Kia Ceed. First of all, we recommend disconnectin

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos