Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Kia Optima?

Model: Kia Optima / K5 MK 4, JF - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Tire pressure warning light

See other generations:
Video tutorial

The procedure for resetting the tire pressure warning light on the Kia Optima is done by first inflating the tires that are not at a sufficient pressure value: this value is reported on the sticker attached to the driver's side door pillar. Once the tires have been inflated, you can go inside the cabin and connect the scanner to the vehicle's OBD port: this is located under the steering column.

After the connection is made, you can select the specific car model and then follow the instructions to reset the warning light.


Posted on 27 April 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Kia Optima?
How to Reset the Tyre Pressure Light on a Kia Optima?
Kia Optima / K5 (2015-2020 / MK 4, JF) To reset the tyre pressure light on a Kia Optima, inflate the tyres until they reach the recommended pressure value, which is indicated on the sticke…
Resetting the Tyre Pressure Light on a Kia Optima
Resetting the Tyre Pressure Light on a Kia Optima
Kia Optima / K5 (2015-2020 / MK 4, JF) This brief video guide shows how to reset the tyre pressure warning light on a Kia Optima, mk4 model produced from 2015 to 2020. If the tyre pressure…
How to reset the oil light on the 2015 Kia Optima
How to reset the oil light on the 2015 Kia Optima
Kia Optima / K5 (2010-2015 / TF, MK 3) Resetting the oil light on the Kia Optima assumes that the oil maintenance and service work, such as a tune-up, have been correctly performed either …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos