Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Kia Forte?

Model: Kia Forte K3 MK  2, YD - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The tire pressure warning light shown on the instrument panel of the Kia Forte can be reset by inflating the tires to the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires have been inflated to this pressure value, you can go inside the cabin and turn on the instrument panel: this way you can verify that the warning light will disappear after a few seconds.

If it remains on, you can drive for a few kilometers and then make it disappear after a few seconds.


Posted on 20 May 2025 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light on a Kia Forte?
How to Reset the Tire Pressure Light on a Kia Forte?
Kia Forte K3 (2013-2018 / MK  2, YD) To reset the tire pressure light on a Kia Forte, inflate the tires to the recommended pressure value. This value is indicated on the sticker attached…
How to Reset the Tire Pressure Light on a Kia Forte?
How to Reset the Tire Pressure Light on a Kia Forte?
Kia Forte K3 (2018-2025 / MK  3, BD) To reset the tire pressure light on a Kia Forte, inflate the tires to the optimal pressure value: this value is indicated on the sticker located on t…
How to Reset the Tire Pressure Light on the Kia K3
How to Reset the Tire Pressure Light on the Kia K3
Kia Forte K3 (2018-2025 / MK  3, BD) Let's look at the steps to reset the tire pressure light on the Kia K3; before resetting the TPMS sensors, ensure all four tires are at the proper op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos