Do it yourself
Frequently asked questions about cars and motorcycles

How to change the turn signal bulb on the Kia Rio

Model: Kia Rio UB, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Side marker bulb

See other generations:
Video tutorial

Let's see how to change the turn signal bulb of a Kia Rio: first, we need to remove the rivets on the front hood of the car, then we need to remove the air intake and lift the front panel. We will also remove the rivets on the body and the fixing bolts of the optical group on both sides; now the optical group can be easily removed.

Having already identified which bulb we want to change, it will be easy to turn the corresponding cap counterclockwise and turn it, again counterclockwise, a quarter turn. When putting the new bulb in place, remember to never touch it with bare hands.

Now repeat everything in reverse, to put the optical group back in place and finish the job.


Posted on 2 August 2025 by ScegliAuto


Related tutorials

Kia Rio (2017-2023 / ) Are the bulbs in the headlamp of your Kia Rio blown and need changing? Here's how to do it. Open the front bonnet by pulling the lever located at the…
Kia Rio (2011-2017 / UB, MK 3) Do you want to change the bulb inside the front headlight of a Kia Rio? Here’s how to remove the damaged bulb. Lift the front bonnet, locate the head…
Kia Rio (2016-2023 / YB, SC, MK 4) The manual reset of the tire pressure warning light on your Kia Rio Mk4 is a really simple operation to carry out, and thanks to the procedure descri…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos