Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield washer fluid reservoir of the Kia Sportage.

Model: Kia Sportage QL, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the windshield washer fluid reservoir of the Kia Sportage. First, let's lift the vehicle and start removing the lower plastic engine cover by taking out all the clips; we will also remove the left front wheel arch after disassembling the wheel, as shown in the video.

At this point, let's disconnect the washer fluid line by unplugging the electrical connector; then, we will unclip and remove the reservoir, replacing it with the new original one, and finally, we will refill it with the new washer fluid.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

Replace Power Steering Oil Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) The power steering oil reservoir is located on the left side of your car, under the bonnet. Open it, using the support rod, and locate the reservoir …
Removing the Windscreen Washer Reservoir on Kia Sportage
Removing the Windscreen Washer Reservoir on Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Before removing the windscreen washer reservoir, you must remove the front bumper. If you are unsure how to do this, refer to our other tutorials, bu…
Replacing Power Steering Fluid
Replacing Power Steering Fluid
Kia Sportage (2004-2010 / MK 2, KM) Open the front bonnet and locate the power steering fluid reservoir: it is on the left side (when facing the front), just behind the windscreen washe…

Other guides you may be interested in

Where is the Reset Button for the Tyre Light on a Hyundai Ix35?

The instrument cluster of the Hyundai Ix35 is equipped with a tyre light that illuminates to alert the driver of low pressure in one or more tyres. In addition to simply having a flat tyre, there could also be a puncture or a malfunction of the monitoring sensor. Once the nature of the problem is determined and resolved, you can quickly reset the tyre light by pressing the button depicting a flat tyre, located on the left side of the steering wheel, for a few seconds, waiting for the warning to turn off on the instrument cluster.

Watch the video!


by ScegliAuto

More videos