Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windscreen Washer Reservoir on Kia Sportage

Model: Kia Sportage MK 2, KM - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

Before removing the windscreen washer reservoir, you must remove the front bumper. If you are unsure how to do this, refer to our other tutorials, but in brief, removing the bumper involves unscrewing all the bolts that secure it from above, below, and in the wheel arches.

At this point, disconnect the two connectors, disconnect the small hose that allows you to drain the reservoir, and unscrew the two screws that secure it from above, then unscrew the hidden bolt clearly shown in the video. Remove the reservoir and proceed in reverse for reassembly.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Spring on Kia Sportage
Removing the Rear Spring on Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) Removing the rear spring from the Kia Sportage? Here’s how to remove the rear shock absorber. Lift the car on a column lift and remove the rear wheel…
Dismantling the Instrument Cluster of the Kia Sportage
Dismantling the Instrument Cluster of the Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Dismantling the instrument cluster of the Kia Sportage? First, remove the protective frame of the cluster. Unscrew the screws located in the plastics…
Removing the Car Radio from Kia Sportage 2
Removing the Car Radio from Kia Sportage 2
Kia Sportage (2004-2010 / MK 2, KM) Today, follow the steps to remove the original car radio from a second-generation Kia Sportage. First, get inside the car and gently pry the plastic …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos