Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to Do if the "One Touch" Function Does Not Work on Kia Sportage Window Controls

Model: Kia Sportage QL, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

After performing work on your Kia Sportage that required disconnecting the battery, the "One Touch" function of the window controls (which allows you to open and close them with a single click) often stops working. Here's how to reset it. Turn on the ignition, fully close the window, and continue to hold the button for 2 to 3 seconds.

Test it, and now the "one touch" control should be functioning again. This procedure must be repeated for each window that has lost its memory, which means all of them.

Disconnecting the battery causes the system to lose the reference of the window's position when fully closed. This way, you communicate the "zero point" to it.


Posted on 24 February 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switch Button on the Kia Sportage MK3
How to Remove the Window Switch Button on the Kia Sportage MK3
Kia Sportage (2010-2016 / MK 3, SL) In this video, you can see how to remove and clean the window switch button on the Kia Sportage: first, remove the internal door panel, starting from…
Replacing the Window Switch Button of the Kia Sportage
Replacing the Window Switch Button of the Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) In this guide, see the main steps to remove and replace the window switch panel of the Kia Sportage in simple steps. First, open the front door and s…
How to Reset the Sunroof of a Kia Sportage
How to Reset the Sunroof of a Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) In this video, see how to reset the sunroof of a Kia Sportage if the roof does not open or close properly: start the engine to ensure you have the ne…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos