Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the KIA Sportage?

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Key

In this tutorial, you will see how to replace the remote battery of the KIA Sportage, a very simple and quick operation. You will need a small flat-head screwdriver and a replacement battery of type CR2032. First, extend the metal key by pressing the appropriate button, then insert the screwdriver into the indicated slot, lever it open, and separate the two halves of the remote. Next, remove the old battery, insert the replacement ensuring correct polarity, and reassemble everything by following the reverse procedure.

Posted on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on the Kia Sportage
How to Replace the Key Fob Battery on the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today, you will learn how to replace the key fob battery on the Kia Sportage. Press the side button to extract the metal key contained within the fob…
How to Replace the Key Fob Battery for the Kia Sportage
How to Replace the Key Fob Battery for the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) This guide will show you how to replace the battery in the key fob for the Kia Sportage. First, take your key fob and pry off the plastic back cover …
How do you change the battery of the Kia Sportage remote control?
How do you change the battery of the Kia Sportage remote control?
Kia Sportage (2010-2016 / SL, MK 3) This video guide explains how to replace the battery of the remote control for Kia vehicles in general, so it is also suitable for the Kia Sportage. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos