Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Speaker Replacement on a Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Speaker

We will show you how to replace both front speakers on this car. Let's start with the treble box positioned at the top. We remove the entire black plate and disconnect the cables, after which we remove the case from the plate and from the support in which we will house the new case. To remove the mid and bass box we will have to remove the entire internal panel of the door: it will be enough to locate the screw cover caps, remove them and unscrew the screws underneath. At this point the entire panel is supported by pressure clips. We remove the panel by disconnecting the electrical cables and the cable that operates the lock. From here we will have access to the cashier in question.

Posted on 25 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the speakers on the 2018 Kia Sportage
How to replace the speakers on the 2018 Kia Sportage
Kia Sportage (2016-2022 / MK 4, QL) Today we will explain how to replace the speakers of the 2018 Kia Sportage car radio by yourself. To replace the speakers, open the front doors on th…
How to replace the cabin air filter of the Kia Sportage 2022.
How to replace the cabin air filter of the Kia Sportage 2022.
Kia Sportage (2021-2026 / NQ5, MK 5) The procedure required to correctly complete the replacement of the cabin air filter in your 2022 Kia Sportage only takes a few minutes. You just nee…
Replacement of the front windshield wiper motor of the Kia Sportage.
Replacement of the front windshield wiper motor of the Kia Sportage.
Kia Sportage (2004-2010 / KM, MK 2) These short and simple steps will show us how to disassemble and replace the front windshield wiper motor of the Kia Sportage. First, we open the hoo…

Replacing Brake Pads on the Moto Guzzi V7

To replace the brake pads on the Moto Guzzi V7, first position the bike on a stable stand on a flat surface. Once done, start by removing the old brake pads from the front brake by simply removing the two springs that secure the pins of the pads (the pins, in turn, secure the brake pads in their housing within the brake block mounted on the wheel). Now, extract the pads from their housing and replace them with new ones. Reassemble everything by following the same steps in reverse. For replacing the brake pads on the rear wheel, once you locate the brake block, unscrew the two bolts using a suitable spanner to access the pads, which can be easily replaced. Reassemble everything and you're done!

Watch the video!


by ScegliAuto

More videos