Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wiper Motor on the Kia Sportage

Model: Kia Sportage MK 2, KM - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the front wiper motor on the Kia Sportage. First, open the bonnet of the vehicle and begin by removing the plastic cover located under the wipers; then unscrew the screws of the wiper motor and disconnect its electrical connector, removing the entire mechanism as shown in the video.

At this point, carry out the repair or replacement of the component, installing it correctly and finally refitting the upper plastic cover!


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to replace the windshield washer fluid reservoir of the Kia Sportage.
How to replace the windshield washer fluid reservoir of the Kia Sportage.
Kia Sportage (2016-2022 / QL, MK 4) In this guide, we will see the instructions that will allow us to disassemble and replace the windshield washer fluid reservoir of the Kia Sportage. …
How to replace the rear windshield wiper blade of the Kia Sportage
How to replace the rear windshield wiper blade of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today we will explain how to replace the rear windshield wiper of the Kia Sportage. To replace it, lift the wiper arm from the window to access the w…
How to replace the front windshield wiper blades of the 2021 Kia Sportage
How to replace the front windshield wiper blades of the 2021 Kia Sportage
Kia Sportage (2021-2026 / MK 5, NQ5) Today we will explain how to replace the front windshield wiper blades of the 2021 Kia Sportage. Lift the blades off the windshield and press the cen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos