Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : Kia Sportage headlight bulb replacement

Kia Sportage - Video tutorial

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Headlight bulb
Operation: Kia Sportage headlight bulb replacement

Today we will see how to remove the headlight bulb of a Kia Sportage in simple steps. First we open and lift the bonnet of our car: then we remove the plastic protection cap of the bulbs that we find on the back of the headlight and we go to disconnect the electrical connector of the lamp itself; at this point we release the iron clip and extract the old light bulb. We just have to replace it with the new one, with the same connection: let's put it in position, fix it by hooking the clip and reconnect the electrical connector; put the cap back on and that's it!


Posted on 27 December 2023 by ScegliAuto



How to replace the headlight bulb of the Kia Sportage 4.
Kia Sportage (2016-2022 / QL, MK 4) To correctly replace the headlight bulb of your fourth generation Kia Sportage (year 2016-2022), simply read the following guide carefully and follow
Replacement of the rear light bulbs of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) When the stop light bulb of the Kia Sportage burns out, we must replace it immediately for our safety and to avoid penalties. We open the trunk hood
How to replace the front headlight bulbs in the KIA Sportage?
Kia Sportage (2016-2022 / QL, MK 4) In this tutorial, we can see how to replace the front headlight bulbs in the KIA Sportage, an extremely simple and quick operation. First of all, mak

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos