Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lights on a Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Headlight

How do you replace the lights in the Picanto's headlamps? Follow these steps to remove the bulbs from the front headlamps. Lift the front bonnet and remove the inspection cover at the rear of the headlamp. If you have space issues in the engine bay, you can remove the entire headlamp. Once the inspection cover is removed, you will find the bulbs with the bulb holder. Pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver. Install the new bulbs and then insert the bulb holder back into the headlamp housing. Secure the bulb holder in the headlamp and fit the covers back onto the rear of the headlamp.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Fog Light Bulb on the Kia Picanto
Replacing the Front Fog Light Bulb on the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) The instructions in this guide will show you how to dismantle and replace the fog light bulb in the front headlight of the Kia Picanto. First, open t…
How to replace the third brake light bulb on the Kia Picanto
How to replace the third brake light bulb on the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) To replace the third brake light bulb of the Kia Picanto, open the trunk, take the inner cover of the third brake light and pull it downwards. Now ta…
How to disassemble the front position light of a Kia Picanto?
How to disassemble the front position light of a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) Good morning, today's goal is to disassemble the front position light bulb of our Kia Picanto. Let's start by lifting the front of the car with the j…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos