Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front position light bulb on a Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Light bulb

Before starting, open the front bonnet of your Kia Picanto. Begin by unscrewing and removing the bolts that secure the front headlamp to the vehicle. Next, unclip and remove the front headlamp, then disconnect the electrical connector. This will give you access to the rear cover of the blown bulb. Proceed by unclipping and removing the cover in question. Once done, extract the base of the position light, then unclip and remove the position light bulb itself. After completing this step, the disassembly will be finished. To fit the new bulb, simply follow this procedure in reverse, and you will have completed the replacement.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Kia Picanto
How to replace the front headlight bulb of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replace the bulb of the right front headlight of the Kia Picanto. Model produced from 2011 to 2017, it is a really simple and quick operation to be c…
How to replace the front headlight bulb of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the left front headlight bulb of the Kia Picanto is a very simple and quick operation to be carried out independently. We start the procedu…
How to Replace the Rear Light of Your Kia Picanto
How to Replace the Rear Light of Your Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Learn how to replace the rear light of your Kia Picanto in this video along with the bulbs. Open the boot lid, and unscrew (using a socket or screwdr…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos