Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp to Replace the Position Bulb on the Kia Sportage Mk2

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Headlight

This guide shows how to remove the front headlamp of the Kia Sportage Mk2. With the bonnet open, remove the plastic fastening pins of the front casing. Once this casing is lifted, use pliers to remove the fastening pin of the headlamp. Remove the 10mm bolt located at the top of the headlamp and begin to pry at the outer edge and then towards the inside to remove the front light assembly. Be careful not to pull too hard to avoid damaging the electrical connections. At this point, you can replace the position bulb.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight Bulb on a Kia Sportage
How to Remove the Rear Headlight Bulb on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before starting, open the tailgate of your Kia Sportage. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next,…
How to Replace the Damaged Number Plate Bulb on Kia Sportage
How to Replace the Damaged Number Plate Bulb on Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) How to replace the damaged number plate bulb on your Kia Sportage. Use a screwdriver or plastic lever to remove the number plate light fitting locate…
How to replace the headlight bulb of the Kia Sportage
How to replace the headlight bulb of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Today we will explain the steps to replace the headlight bulb of a Kia Sportage vehicle. The first thing to do is to open the front hood and remove t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos