Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Logo on Kia Optima

Model: Kia Optima / K5 MK 3, TF - Years 2010-2015
Part: Manufacturer emblem

How to replace the manufacturer's badge on a Kia Optima? Let's see how to remove it from the back of the boot. Obtain some plastic trim tools to avoid scratches, then pry between the logo and the plastic of the boot until it detaches from the bodywork. Use a plastic wire to cut the adhesive from the logo. Once the piece is detached, remove it from its seat and prepare to fit the new logo: position the badge perfectly on the plastic holder, press with your hands until the badge fits securely into the holder. Go over the surface of the logo several times until it is fully adhered.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Rear-View Mirror of the Kia Optima
Removing the External Rear-View Mirror of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) In this guide, we will see the procedure for removing and replacing the external rear-view mirror of the Kia Optima. First, open the front door of th…
How to replace the rear headlight bulb of the Kia Optima
How to replace the rear headlight bulb of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) In the following guide, we will explain the various steps you need to take in order to properly replace the rear headlight bulb of your Kia Optima. F…
How to Replace the KIA Optima Remote Battery
How to Replace the KIA Optima Remote Battery
Kia Optima / K5 (2015-2020 / JF, MK 4) In this tutorial, you will see how to replace the KIA Optima remote battery, a very simple and quick operation. You will only need a small flat-head …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos