Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Shift Knob on the Kia Seltos

Model: Kia Seltos MK 1 - Years 2019-2026
Part: Shift knob

Today, you will learn how to remove and replace the shift knob on the Kia Seltos in this brief and simple guide. First, get inside the vehicle and start by pulling the shift boot off its base, prying at the sides. Then, grasp the shift knob with both hands and pull it upward to remove it along with the shift boot, as shown in the video. Now, separate the old knob from the shift boot and replace it with the correct new one; secure it onto the shift lever and then onto the boot, following the video tutorial until the end!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Shift Knob on the 2025 Kia Seltos
How to Remove the Shift Knob on the 2025 Kia Seltos
Kia Seltos (2019-2026 / MK 1) In this guide for 2025 Kia Seltos owners, you will learn how to quickly and safely remove the shift knob. Before proceeding, make sure to completely …
How to Remove the Taillight from a Kia Seltos?
How to Remove the Taillight from a Kia Seltos?
Kia Seltos (2019-2026 / MK 1) Removing the taillight from a Kia Seltos is a task anyone can handle. The taillight is held in place by just two screws, which you can easily see whe…
How to reset the TPMS light on the 2022 Kia Seltos
How to reset the TPMS light on the 2022 Kia Seltos
Kia Seltos (2019-2026 / MK 1) If you want to manually reset the TPMS light on your 2022 Kia Seltos, you need to pay attention to the following procedure and follow all the steps. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos