Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Differential Oil

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Drivetrain

After raising the vehicle on a lift, locate the front differential drain plug: it is positioned where the drain tube splits. Unscrew the plug and drain the used oil (collect and dispose of it properly); once the draining is complete, clean the plug of any debris and tighten it before proceeding to refill with new oil. The fill plug is located slightly further over and requires a small tube to insert the oil: when it begins to overflow, the level is reached and you can tighten the corresponding plug.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Differential Oil Replacement
Differential Oil Replacement
Kia Sportage (2004-2010 / MK 2, KM) To replace the oil in the rear differential, lift the vehicle on a hydraulic lift or suitable axle stands to gain comfortable access to the different…
How to replace the oil filter and engine oil of the 2018 Kia Sportage
How to replace the oil filter and engine oil of the 2018 Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Replacing the oil filter and engine oil on a 2018 Kia Sportage vehicle is a fairly simple operation to perform independently. We open the front hood …
How to Replace the Engine Oil and Oil Filter on a Kia Sportage 2.0 CRDI
Kia Sportage (2010-2016 / SL, MK 3) Learn how to carry out the procedure and routine maintenance service by replacing the engine oil and oil filter on the Kia Sportage 2.0 CRDI. First, …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos