Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the LPG Filter on a Kia Ceed

Model: Kia Cee D MK 3, CD - Years 2018-2024
Part: Checks and maintenance

In this video tutorial, you will see how to replace the LPG filter on a Kia Ceed. The first step is to get into the vehicle, turn off the car, and engage the handbrake, then close the LPG valve on the cylinder. Get back into the vehicle and start the engine to consume the remaining LPG until the engine switches to petrol or stalls; only then can you proceed to remove the filter. Use pliers to loosen the clamp and slide off the rubber hose. With the appropriate pliers, remove the circlip and then the hose holder; at this point, you can remove the LPG filter and clean any dirt inside using a clean cloth. Refit the filter and reassemble all parts in reverse order. Only at the end is it possible to open the LPG valve on the cylinder and start the engine. If you notice a momentary vacuum, this is normal when switching from petrol to LPG because the system was empty.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Cee D (2012-2018 / JD, MK 2) To replace the battery on the Kia Ceed, open the bonnet to access the components inside the engine bay. The battery is located here, directly beneath…
Kia Cee D (2006-2012 / MK 1) Start by pressing and holding the button located on the top side of the electric key for our Kia Ceed, which will open the physical key. Next, using …
Kia Cee D (2012-2018 / JD, MK 2) In this tutorial, see how to replace the cabin filter in the KIA Ceed, a very simple and cost-effective operation. Start by sitting in the passenger …

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos