Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Headlight Bulb Replacement for Kia Stonic 2019

Model: Kia Stonic Ybcuv, MK 1 - Years 2017-2026
Part: Headlight bulb

Today, in this brief video, see how to remove and replace the headlight bulb of the 2019 Kia Stonic, following the instructions below. First, open the bonnet and remove the protective cap of the bulb; then disconnect the electrical connector, and unclip the metal spring to remove the bulb, as shown in the video. At this point, replace it with the new one of the correct type and fitting; in this case, a new LED bulb is fitted, applying the reverse procedure for reassembly!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb in the Kia Stonic?
How do you replace the front headlight bulb in the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) Regardless of the type of bulb to be used, for example in the video it is shown how to install an h7 on a headlight that involves similar work phases…
How to Replace the Headlamp Bulb on a Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To replace the dipped beam headlamp bulb on the Kia Stonic, open the car's bonnet and remove the plastic cover located over the affected headlamp. To…
How do you replace the front headlight bulb in the Kia Stonic?
How do you replace the front headlight bulb in the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) The main reason for replacing one of the bulbs of the front headlight of a car is the filament breaking. In addition to this reason, there are also t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos