|
Do it yourself
| |||
| ||||
How to Replace the Emblem on a Kia Telluride
Model: Kia Telluride
MK 1
- Years:
2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
In this video tutorial, you can see how to replace the emblem on a Kia Telluride by following some simple steps: the first thing to do is purchase a new emblem. Next, prepare the work area by placing 3mm tape around the emblem to protect the paint from scratches caused by the heat gun and screwdriver. Required materials: a heat gun, a couple of microfiber towels, a screwdriver, tape, and plastic trim tools to remove the emblem. Once the work area is prepared, use the heat gun on medium heat. Once the area is heated, take the screwdriver and trim tool and try to remove the emblem without scratching the paint. Continue heating the area until the emblem comes off. Once the emblem is removed, replace it with the new one, clean the area well with the microfiber towel, peel off the backing from the new emblem, and stick it on the vehicle, pressing it firmly against the body with the microfiber towel.
Updated on 5 June 2026 by ScegliAuto
Related tutorials
Kia Telluride
(2019-2026 /
MK 1)
If you don't know how to manually reset the service light on your 2023 Kia Telluride, don't worry. This guide provides the necessary steps to complet…
Kia Telluride
(2019-2026 /
MK 1)
Resetting the service light in the Kia Telluride is done through a procedure that starts by turning on the instrument cluster and pressing the button…
Kia Telluride
(2019-2026 /
MK 1)
Replacing the remote battery for the KIA Telluride, as shown in this tutorial, is an extremely simple and quick operation. First, obtain a CR2032 bat…
Other guides you may be interested in
|
How to lower the rear seats in the Peugeot 206?
In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
